Why Shoot Ravntek
BE ONE OF THE FIRST TO TRY OUR NEW 2.6 UPPERCUT!
OUR EASY SMOOTH DEPLOYING NEVER FAILING BLADES, WITH SUPERB BLADE RETAINMENT WHEN SHOT AND IN FLIGHT.
FAVD. "FULL ARROW VELOCITY DEPLOYMENT" MEANS THE BLADES MAINTAIN ARROW VELOCITY DURING DEPLOYMENT. BECAUSE THE BLADES DONT NEED TO STOP OR SLOW ON IMPACT TO DEPLOY, IT ELIMINATES THE BLADES FROM VIOLENTLY HITTING DOWN ON FERRULE CAUSING SHOCK TO THE BLADES AND TO THE ARROW, WHICH CAN KNOCK SIGNIFICANT ENERGY OUT OF THE ARROW AND CAUSE POOR ARROW PENETRATION.
LARGE 11/16 COC TIP BLADE BLOODIES A PATH AHEAD OF THE BIG BLADES AND FERRULE THAT WILL SLICE AND SLIDE THROUGH MUCH EASIER THEN NON CUT ON CONTACT DESIGNS, AND POORER BLADE CONFIGURATION.
OUR BLADE CONFIGURATION ALLOWS EACH BLADE TO CUT TO THERE FULL CUTTING DIAMETER, UNLIKE BLADE CONFIGURATIONS WITH SAME SIZE BLADES IN FRONT AND BACK, SMALLER BLADES IN REAR ARE WORSE. MUSCLE PULLS AWAY ONCE CUT AND ALREADY PRESENTS A HOLE COMBINED WITH BLADE SPEED THAT WILL PUSH MUSCLE AWAY AND EVEN CAUSES EQUAL SIZE BACK BLADES TO NOT CUT UP TO THERE CUTTING DIAMETER LIKE FRONT BLADES. AND SMALLER BLADES BEHIND BIGGER BLADES LIKE BLEEDER BLADES BECOME NEARLY NONEXISTANT AND HAVE LITTLE CUTTING IMPACT WITH BIGGER LEADING BLADES.
COMPETITERS USEING BIG CUT ON CONTACT TIPS AND TIGHT BLADE RETAINMENT DEVICES AND BLADES WITH SMALL FRONT SHOULDERS OR LEVERS TO DEPLOY BLADES, WHEN SHOT WITH CROSSBOWS OR HIGH FPS COMPOUND SPEEDS, CAN CAUSE BLADES TO SLIP INTO THE COC TIP HOLE AND FAIL TO FULLY DEPLOY BLADES BEFORE ENTERING CREATING ONLY A SMALL ENTRY HOLE. AND IF YOU DONT GET AN EXIT HOLE YOU WILL NOT HAVE A BLOOD TRAIL.
NO BREAKING OR BENDING AT O RING GROOVE IN BLADE DURING DEPLOYMENT OR PENETRATION..
MINIMAL EXPOSED FLAT BLADE SURFACE IN FLIGHT.
NO MECHANICAL/FIXED BLADE TRADEOFFS:
- PENETRATION AS GOOD AS FIXED BLADE
- DURABILITY AS GOOD AS FIXED BLADE
- NO BIG WINDOW CUT OUTS, LESS FLAT SURFACE
- ACCURACY BETTER THEN FIXED BLADE
- BIGGER CUTTING DIAMETER/SURFACE, 3.4 INCHES OF CUTTING SURFACE
- AS RESULT WILL CAUSE MORE BLOOD LOSS AND
- EASIER TO FOLLOW SHORTER BLOOD TRAILS.
EASY TRIP LEVER DEPLOYMENT.
OTHER LEVER DEPLOYMENT DESIGNS WHERE LEVER HAS NO REARWARD MOVEMENT ON IMPACT AND JUST ROTATES ON A SCREW USES UP ALOT MORE ENERGY WHEN DEPLOYING BLADES.
THESE HEADS ARE TESTED AT OVER 550 FPS, AND DEPLOYS BLADES FULLY BEFORE ENTRY WITH NO DAMAGE.
OUTER AND POSSIBLE INNER HYPER EXTENSION CUT DEPENDING ON ARROW SPEED.
FIELD POINT ACCURATE.
NON TENSION O RING BLADE RETAINMENT 100 PERCENT ELIMINATES BREAKAGE AND FAILURE DURING SHOT. ALSO CAN KEEP USEING THE O RING BY SIMPLY TWISTING IT AROUND TO NEW AREA FOR BLADE TO SNAP ON. CAN DO THIS MANY TIMES.
DEVASTATING CUT ON CONTACT TIP DESIGN IS MORE RESISTANT TO POOR PENETRATION DUE TO POSSIBLE TIP BEND OR ROLL, CAUSED BY DESIGNS HAVEING TIP BLADE FURTHER IN FRONT OF FERRULE THAT CAN NOT GIVE TIP OF BLADE NEEDED SUPPORT.
FERRULE, 100% SPIN TESTED. SHORT, STRONG STRATEGIC ANTIWEDGE DESIGN. MADE WITH STRONG T7 7075 ALUMINUM.
.032 THICK MAIN BLADES ARE EXTREMELY STABLE AFTER DEPLOYEMENT WHEN LEVERS BECOME ONE WITH THE BLADE. HOLDS UP GREAT AGAINST ANY GLANCING BLOWS BETWEEN RIB BONES THAT CAN CAUSE BLADES TO TWIST RAPIDLY WHEN GOING BETWEEN RIBS CAUSEING SEVERE SIDE G FORCE TO BLADES THAT CAN BEND WEAKER DESIGNED BLADES. THE LEVERS ALSO HELP BREAK THROUGH RIBS EASIER ALLOWING BLADE TO GO THROUGH MUCH EASIER, AND NOT BINDING BETWEEN THEM.
.032 THICK TIP BLADE.
SHOTS ON SEVERE 45 DEGREE ANGLE OR MORE, IF BLADES HIT HORIZONTAL TO RIBS, THE INSIDE BLADE WILL EASILY PASS BY THEN INSTANTLY LOCK OPEN. OR IF NEEDED WILL EASILY PIVOT AROUND RIB. BLADES THAT STOP ON IMPACT THEN FULLY DEPLOY AT 55 DEGREE ANGLE OR MORE BEFORE ENTRY WILL KICK THE ARROWS BACK END OUT CAUSING ENERGY LOSS AND GETTING POOR PENETRATION.
COMES WITH 3 EXTRA O RINGS.
CAN SWAP OR CHANGE BIG BLADES WITH A .060 INCH SMALL FLAT HEAD SCREW DRIVER, AND .050 INCH ALLEN KEY FOR TIP BLADE. THESE DO NOT COME WITH THE PACKAGE.
45 DEGREE BIG BLADE ANGLE.
NON BARBED DESIGN PULLS OUT OF TARGETS EASILY, AND GAME